StillMate 65L Copper Pot Still - V6507 (With boiler)

Description:

This is a 65L pot still simulator the professional distillery with copper dome, whisky onion/helmet, chimney, Lynn Arm and copper condensor as well as copper parrot.

The boiler is 65L temperature controlled Digiboil boiler with 2000w/1000w/500w heat elements which you can run with combination of these 3 elements. The boiler comes with thermostat and concealed elements. With the power station supplied, you are able to run the boiler step-less heating to your needs.

The function of dome and onion is inside the alembic dome, the vapors come into contact with a cool surface, which causes them to condense back into a liquid form. This liquid then collects in the dome and is channeled out through a spout or valve.

The alembic dome and onion play a crucial role in the distillation process because it helps to separate the volatile components of the liquid from the non-volatile components. The volatile components, which have a lower boiling point, evaporate and rise up into the dome, while the non-volatile components remain in the still.

The chimney has similiar function as the dome but the height of the chimney improve the seperation of the non-volatile components from volatile components.

The lyne arm is an essential component of a pot still used for distilling liquids such as alcohol. Its primary function is to help control the level of reflux that occurs during the distillation process

All in all, all combinations above purify your spirits and get better result than those equipment without those parts. You will get payback from these equipment and brew as pro.

Features:

• High-Quality Copper made 40cm Dome
• 500mm copper chimney change the size from 4″ to 2″ fitting
• 25cm diameter copper onion
• 2″-1.5″ Lynn arm
• 1.5″ Copper elbow, condenser and parrot
• Supplied with 4000w Power station

Packaging:

• 1 x 65L full stainless steel digiboil boiler which has build-in thermostat and concealled elements with choice of 500W/1000W/2000W
• 1x Full solid 40cm copper dome with 4″ ferrule and silicone seal
• 1 x 25cm copper onion
• 1 x 500mm/4″-2″ copper chimney
• 1 x 2″-1.5″ Lynn arm
• 1 x 1.5″ 90C elbow
• 1 x 1.5″/300mm copper condensor
• 1 x Copper parrot with drain valve
• 1x 4000w power station/voltage controller
• All Triclover clamps and seals
• Water hose for condenser

Note: All parts supplied not assembled, you need to assemble together yourself.